V-182F : To Control cylinder speed.    

        : Also suitable for gauge snubbing.                        : 1/4" NPTF female ports.

 

 

 

 

     

 

V-91 : Adjustable for metering oil out of a gauge 

      to prevent snapping  of gauge pointer when          load or pressure is suddenly released                : Also suitable as shut-off valve to protect the          gauge during high cycling applications.

 

 

   

    : 1/2" NPTF male and female threads for use           with GA-1, GA-2 or GA-4 gauge adaptor 

 

 

 

 

 

 

     

 

V-10 : To be used when gauge pressure must be monitored 

      during high cycle applications.

                                   

    : Creates a flow resistance when load is                   released suddenly.

 

    : No adjustments are necessary.

 

    : 1/2" NPTF male and female threads for use           with GA-1, GA-2 or GA-4 gauge adaptor 

 

 

 

 

 

 

     

 

V-42 Maximum Operating Pressure (bar)

V-42 Oil Ports 

V-42 : Can be mounted at the cylinder to hold the load

           in case of system pressure loss.

        :  Normally used with double-acting cylinder

           where pilot port receives pressure from

            a Tee-fitting in the cylinder retract line.

        :  3/8" NPTF female port.

        :  Pilot pressure ratio 14% (6.5:1)

V-66 :  Used for load holding applications with 

       single and double acting cylinders.

                                   

    :  Valve is manually opened to allow oil to flow         back to tank when cylinder retracts.

    

               

 

 

 

 

        

V-66F :  Similar to V-66 but with very fine metering capability

         for precise flow control.

                                   

      :  Not designed for load holding applications. 

 

 

 

         

V-152 : Limits pressure developed by the pump in hydraulic circuit,

             thus limiting the force created by other components.

          :  Valve opens whenever preset pressure is reached. 

          :  To increase pressure setting, turn handle clockwise. 

          :  Includes :  3ft return line hose kit , ±3% repeatability,

             800-10,000psi adjustment range.             

 

V-161 : To control oil flow to a secondary circuit. 

          :  Flow is blocked until system pressure rises to the V-161 setting.

          :  When this pressure level is reached, the V-161 opens to 

              allow flow to the secondary circuit.

          :  A pressure differential is always maintained between

             the primary and secondary circuit. 

          :  Min. operating pressure : 2000 psi.